conquerorforum.com
Sign up Calendar Latest Topics Chat Donate
 
 
 


Reply
  Author   Comment  
RJV

Member
Registered:
Posts: 57
Reply with quote  #1 
FOR SALE

National Luna 90 litre stainless steel fridge/freezer for sale.

This model has a 50 litre and 40 litre compartment and dual thermostats and digital controls so can be set up with either side as fridge and other side as freezer, or both sides as fridge or both sides as freezer.  Complete with 5 plastic baskets.

Size is 535mm H x 835mm W x 495mm D.  Specifications and other information available here : http://www.nationalluna.com.au/90-twin-ss/

Available for collection in Melbourne, or I will deliver for free to the Melbourne depot of your chosen shipper/courier.  So that you can obtain your own shipping/courier quote note that the overall carton size is 560mm H x 880mm W x 570mm D, and weight is approximately 40kg.

This model retails on the West Coast for around $2,999 and on the East Coast for around $3,150.  This model is stainless steel not the lower cost aluminium clad model.

If interested then please make a sensible offer via Email or Private Message.

Thanks for reading.

  90litreSS.jpg

0
Bruce

Member
Registered:
Posts: 38
Reply with quote  #2 
Hi RJV,

Does this fridge fit in the kitchen slide of a 490?

Thanks

Bruce
0
Caddyman

Avatar / Picture

Member
Registered:
Posts: 42
Reply with quote  #3 
Hi Bruce,
Yes, the 90 litre is a perfect fit......

__________________
Grant Lucas
2013 Conqueror Commander Owner
0
Bruce

Member
Registered:
Posts: 38
Reply with quote  #4 
Thanks Caddyman for your response.

I'm curious to understand if the fridge fits in between the rails as the listed specs show the unit wider than the space between the rails.
Do you have to "pack" the base up so the fridge sits on top of the rails?
0
William the Conqueror

Avatar / Picture

Star Member
Registered:
Posts: 860
Reply with quote  #5 
Hi Bruce

The fridge will sit between the 2 rails.

It sits down on the bottom of the angle and is easily attached with a couple of Bolts/screws (mine is attached with 4 tek screws) thorough the bottom of the angle from underneath.

if needed, I will post some photo's for you.

Cheers

Anthony

__________________
Vive Les Peuerels
0
Bruce

Member
Registered:
Posts: 38
Reply with quote  #6 
Thanks Anthony, photo's would be great if not too much trouble......
I only have 490mm between the rails on my 490, so I'm struggling to understand how a fridge that is 570mm can fit?????
0
William the Conqueror

Avatar / Picture

Star Member
Registered:
Posts: 860
Reply with quote  #7 
No Problem, will post some on weekend

Not sure if you are reading the measurements correctly. I think you have read the size of the carton as the size of the fridge.

Just measured mine and the fridge is just under 490 mm deep (from front to back) and 810 mm wide (from side to side). Height is the same as the stove unit.

The spacing is tight (only 5 - 10 mm to play with) and it will take two people to get it into place, but rest assured, it will fit as it is the same model as mine.

Cheers

Anthony

__________________
Vive Les Peuerels
0
Bruce

Member
Registered:
Posts: 38
Reply with quote  #8 
Thanks Anthony,

Now that I know the fridge fits, I will get in touch with RJV to see if it's still available and where he is located as I'm in Geelong.
Photo's aren't necessary now as you have stated it definitely fits in the slide rails.

Have a great one and thanks for your assistance!

Cheers

Bruce
0
ccdio

Moderator
Registered:
Posts: 126
Reply with quote  #9 
Sold?

0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.